150mm Elbow 90 Degree Bend

150mm Elbow 90 Degree Bend

The 150mm Elbow 90 Degree bend is a stainless steel flue fitting that turns a 150mm flue through a right angle. Use it to take a flue out through a wall or around an obstacle.

  • Stainless steel that resists rust and heat
  • Light at 0.55 kg
  • Fits standard 150mm single skin flue pipe

R565.51

Specifications

MaterialStainless steel
Weight0.55 kg
Diameter150mm

Delivery, installation and collection arrangements require confirmation. Ask Fire Flames.

Description

A 150mm Elbow 90 Degree fitting, often called a 150mm bend, changes the direction of your flue by a full right angle. It is the fitting you need when a fireplace with a rear outlet has to go up, or when the flue must leave through an outside wall instead of the roof.

150mm Elbow 90 Degree Details

  • Diameter: 150mm
  • Angle: 90 degrees
  • Material: stainless steel
  • Type: non-insulated
  • Weight: 0.55 kg

What it fits

This stainless steel elbow 90 degree fitting joins standard 150mm flue pipe, the size used by many wood fireplaces and stoves. Check your fireplace manual or spec sheet for the flue diameter before you order. It is a non-insulated part, so it belongs inside the room, not in the ceiling space or through the roof, where insulated flue is needed.

Fitting tips

Every 90 degree flue bend slows the draught a little, so use as few as possible and keep horizontal runs short. Seal the joints well and fix the flue firmly so nothing shifts as it heats and cools. If you are unsure, our flue installation team can plan and fit the full run.

Do I need a 90 or a 45 degree fitting?

Use a 90 degree elbow for a sharp change, such as from a rear outlet straight up, or into a wall. For gentle offsets, two 45 degree bends draw better. Browse our flue elbows or the full flues and accessories range for other angles and sizes.

Need help choosing flue parts? Contact our team or WhatsApp a photo of your setup.

Additional information

Material

Weight

0.55 kg

Diameter

150mm