Hydrofire Phoenix 5kW-11kW Freestanding Fireplace
SKU HYD01000222 Category Brand:

Hydrofire Phoenix 5kW-11kW Freestanding Fireplace

The Hydrofire Phoenix is a compact steel wood fireplace for smaller lounges, large bedrooms and offices. It runs from 5 to 11kW, is rated for about 76 m² and burns at 80% efficiency.

  • Three-stage clean burn for less smoke
  • Air wash keeps the glass clearer
  • Delivered and installed by our Hydrofire Cape Town team

R11,999.00

Specifications

Weight54 kg
Dimensions32 x 46.5 x 60.6 cm
MaterialSteel
Power Output kW5kW-11kW
Heating Area76 m²
Flue OutletTop
Flue Diameter130mm
Fuel TypeWood
Efficiency %80%

Delivery, installation and collection arrangements require confirmation. Ask Fire Flames.

Description

Compact rooms deserve a real fire too. The Hydrofire Phoenix is a small wood fireplace that stands just 60.6 cm tall and 46.5 cm wide, yet it delivers a useful 5 to 11kW of heat. It suits a snug lounge, a main bedroom suite or a home office, and it uses wood sparingly while still giving a lively flame to watch.

Hydrofire Phoenix Fireplace Features

Solid steel construction

The Phoenix is a steel wood fireplace built from thick plate, which gives it a sturdy feel and quick warm-up. It weighs 54 kg, so it is easy to place on a standard hearth.

Three stages of combustion

Precise air controls feed three separate air supplies. Primary air enters through a vent low on the door and feeds the fire from below. Secondary air keeps the flames burning cleanly and runs down the inside of the glass as a pre-heated air wash. Tertiary air enters through holes at the back of the firebox and burns off the leftover gases. The result is 80% efficiency and a cleaner burn that meets Euro 2022 Eco-Design requirements.

Simple flue connection

A 130mm flue leaves from the top, so the usual installation is a straight run through ceiling and roof.

Is the Phoenix fireplace right for your home?

Hydrofire rates the Phoenix for about 76 m², which is a small to medium lounge or a generous bedroom. Use the lower end of the output range for mild evenings and open it up when a cold front arrives. If your living area is much larger, our guide to proven Hydrofire models compares bigger options, and you can browse all freestanding fireplaces.

Installation in Cape Town

We supply and install the Phoenix with its 130mm flue, a cowl that resists back-draught in strong wind and flashing that seals out winter rain. You get a compliance certificate when we are done. Read about our fireplace installation in Cape Town or view the full Hydrofire range.

Hydrofire Phoenix FAQs

Can I put the Phoenix fireplace in a bedroom?

Yes, a closed combustion wood fireplace with a sealed flue can go in a larger bedroom, provided clearances and ventilation are right. We check the room on site, and we always recommend a carbon monoxide alarm nearby.

Is the Hydrofire Phoenix efficient on wood?

Its 80% efficiency and tertiary burn mean more heat from each log than an open fire or an older stove. Burn dry, seasoned hardwood for the best result.

Want steady warmth in a smaller room? Get a quote from our team on the Phoenix, flue and fitting.

Additional information

Weight

54 kg

Dimensions

32 x 46.5 x 60.6 cm

Material

Power Output kW

Heating Area

Flue Outlet

Top

Flue Diameter

130mm

Fuel Type

Wood

Efficiency %

80%