SKU HYD01000233 Category Brand:

Hydrofire Cali 10KW Freestanding Fireplace

The Hydrofire Cali is a cast iron wood fireplace with a 10KW output and a wide, flat top you can boil a kettle on. Rated for about 96 m2, it suits medium to large lounges and open-plan rooms.

  • Solid cast iron door, body and top
  • Air wash keeps the glass clean
  • Top or rear 150 mm flue
  • Supplied and installed in Cape Town

R15,999.00

Specifications

Weight125 kg
Dimensions58 x 44 x 70 cm
MaterialCast Iron
Power Output kW10KW
Heating Area96 m2
Flue OutletTop/Rear
Flue Diameter150 mm
Fuel TypeWood
Efficiency %70%

Delivery, installation and collection arrangements require confirmation. Ask Fire Flames.

Description

Good value and built to last, the Hydrofire Cali is a cast iron fireplace for homes that want strong, steady heat without fuss. It gives 10KW of warmth, has a broad flat top that doubles as a hob during power cuts, and suits most medium to large living areas.

Hydrofire Cali Fireplace Features

Cast iron from door to top

The door, body and heavy top are all cast iron. It warms up evenly and keeps releasing heat after the flames die down, which means fewer cold corners and less wood over a long evening.

A top that earns its keep

The wide flat surface takes a kettle or a pot, which comes in handy when load shedding hits at supper time.

Two-stage air for a cleaner burn

A lower vent on the door feeds air under the grate to get the fire going. A second vent above the door adds secondary air, which burns off more smoke and runs a pre-heated air wash over the glass so it stays clear.

Built for easy use

Fire rope seals the door, a cast iron baffle plate slows the heat on its way to the flue, and a riddling grate helps clear ash. The legs are removable. It measures 58 x 44 x 70 cm, weighs 125 kg, has a 70% efficiency rating and fits a 150 mm flue at the top or rear.

Is the Cali fireplace right for your home?

Our listing gives the Cali a heating area of about 96 m2, so this 10kW fireplace suits a good-sized lounge or an open-plan living and dining space. Lots of glass or high ceilings lower that figure, so we check your room first. Compare it with other Hydrofire fireplaces in our freestanding fireplaces range, or read our guide to proven Hydrofire models.

Installation in Cape Town

Our team installs the Cali with the right flue, cowl and roof flashing for Cape wind and winter rain, and handles compliance. Learn about our fireplace installation in Cape Town or browse the full Hydrofire range.

Hydrofire Cali FAQs

Can I cook on top of the Hydrofire Cali?

Yes, within reason. The flat cast iron top heats a kettle or keeps a pot warm, which is handy during power cuts. It is not a full stove, so expect slow cooking rather than fast boiling.

Can the Cali connect through the back wall?

Yes. It has a top or rear 150 mm flue outlet, so we can run the flue through a wall or straight up through the ceiling, depending on your home.

Want warmth that lasts all winter? Request a quote or WhatsApp our team.

Additional information

Weight

125 kg

Dimensions

58 x 44 x 70 cm

Material

Power Output kW

Heating Area

Flue Outlet

Top/Rear

Flue Diameter

150 mm

Fuel Type

Wood

Efficiency %

70%