Description
Our 80mm elbow 45 degree bend lets you change the direction of a small flue without losing too much draw. A 45 degree angle is gentler than a 90 degree bend, so smoke and gases flow more freely and soot is less likely to build up.
80mm Elbow 45 Degree Specifications
- Diameter: 80mm
- Angle: 45 degrees
- Material: stainless steel
- Type: non-insulated flue elbow
- Weight: 0.17 kg
Where an 80mm 45 degree bend is used
An 80mm flue is a small size, often used on compact heaters and appliances with a narrow outlet. Two of these bends together are a common way to create an offset around a roof beam, a wall plate or a gutter. Note that it is a stainless steel flue elbow, not a plumbing elbow pipe, so it is not a match for PVC. Browse more 45 degree elbows or our full flues and accessories range.
Fitting
Keep bends to a minimum and keep the flue as vertical as you can for a good draw. Our team can plan and fit the whole run, including clearances to combustible materials. See our flue installation in Cape Town service.
Can I use this elbow on an insulated flue?
It is made for single wall, non-insulated pipe. Where the flue passes through a ceiling or roof space, a double skin insulated section is usually needed. We can advise on the right parts.
Need help with a short flue run? Get hold of our team with your appliance details and we will list the parts.
