Description
This half-metre 450mm 0.5m duct single skin is a straight stainless steel section, half a metre long, made for 450mm diameter flue systems. Large flues like this are common on big open fireplaces, braai canopies and commercial setups, and a short length is often what you need to finish a run at the right height. Think of it as a 450mm flue duct for the last stretch before the cowl, or for lining up a bend neatly.
Where to Use a 450mm 0.5m Duct Single Skin
A single skin duct has one wall of stainless steel and no insulation layer. That suits runs that stay inside a chimney breast, a braai hood or a well ventilated space. Where the flue passes through a ceiling, roof or timber, it needs the correct clearance or an insulated section, and we advise on that during the site visit.
Specifications
- Diameter: 450mm
- Length: 0.5m
- Material: stainless steel, non-insulated
- Weight: 2.85 kg
Fitting the duct
Join it to matching 450mm stainless steel duct sections, bends and cowls from our 0.5m single skin ducts range. Make sure each joint is secure and supported so wind cannot shake the run loose. For full systems, see all flues and accessories.
Do I need a 0.5m or a 1m duct?
Use the 1m length for most of the run and a 0.5m piece to fine-tune the height. Our team measures on site so the cowl ends up above the roofline where it draws well.
Need a large flue planned and fitted? Our flue installation team in Cape Town can help, or send us your measurements for advice.
