Description
The 350mm 45 degree elbow is a stainless steel elbow 45 degree bend that turns a 350mm flue at a gentle angle. It is the part you need when the flue cannot run in one straight line, for example to clear a roof truss, step around a beam or line up with an existing chimney.
350mm 45 Degree Elbow Details
- Diameter: 350mm
- Angle: 45 degrees
- Material: stainless steel
- Weight: 2.1 kg
Why choose a gentle flue bend
Smoke likes a smooth, gentle path. A 45 degree angle keeps the change of direction soft, so the flue keeps drawing well and soot does not build up as quickly as it can in a sharp bend. Most offsets use two bends: one to move across and one to turn back to vertical. Large 350mm flue runs are common on big wood fireplaces, commercial braai canopies and pizza ovens, where a lot of smoke has to move quickly. A pipe elbow of the wrong size or angle can choke that flow, so it pays to get it right the first time. You can find matching parts in our 45 degree elbows range.
Fitting note
Keep bends to a minimum and keep the flue as straight as you can. Each elbow must match the diameter and skin type of the rest of the flue. Our team plans the full route and fits the bends, sections and supports through our flue installation service. See all flues and accessories for pipes, cowls and flashing.
How many 45 degree bends can a flue have?
As a rule, keep it to two bends in one run, so the smoke still draws well. Long or awkward routes need a proper check, so send us a sketch or photo and we will plan it.
Need help with an offset? Ask our flue team and we will work out the parts list for your install.
