Hydrofire Merida (IT100K) 14.5KW Built-in Fireplace
SKU HYD01000303 Categories , Brand:

Hydrofire Merida (IT100K) 14.5KW Built-in Fireplace

The Hydrofire Merida (IT100K) is a wide, landscape built-in wood fireplace with a big 14.5kW output. It is made for open-plan living areas where a long fire view and plenty of heat both matter.

  • 104 cm wide firebox face for a broad flame picture
  • Steel build, 180 mm top flue
  • Built in and finished by our Cape Town team

R48,999.00

Specifications

Weight130 kg
Dimensions104 x 47 x 65 cm
MaterialSteel
Fuel TypeWood
Power Output kW14.5kW
Heating Area95 m²
Efficiency %73.00%
Flue OutletTop
Flue Diameter180 mm

Delivery, installation and collection arrangements require confirmation. Ask Fire Flames.

Description

Long, low and wide, the Hydrofire Merida is a built-in fireplace for people who want the fire to stretch across the wall. Sold as the Merida IT100K, it burns wood, puts out up to 14.5kW and has a steel body that is 104 cm wide. It fits a modern cladded wall, a TV wall with the fire below, or a renovated chimney breast.

Hydrofire Merida Built-in Fireplace Features

A wide fire view

The landscape shape (104 x 47 x 65 cm) gives a broad, letterbox view of the flames. It suits a contemporary room and lets the fire be seen from most seats in an open-plan space.

Plenty of output

With 14.5kW on tap, the Merida can bring a cold room up to temperature quickly. You control the burn rate with the air supply, so you can run a strong fire on a wet July evening and a gentler one on a mild night.

Practical build

At 130 kg it is manageable to install compared with many built-in units. It uses a 180 mm flue from the top and has an efficiency of 73 percent, which is a solid figure for a wide, open-view wood burning fireplace.

Is the Merida right for your home?

Hydrofire lists a heating area of 95 m2 for this model. That suits a large lounge or a living and dining area together. Rooms with very high ceilings or lots of glass may feel cooler, so send us your floor plan and we will confirm the fit. You can compare other options on our Hydrofire page and in the built-in fireplaces range.

Installation in Cape Town

Our built-in fireplace design and cladding team builds the opening, adds heat-safe insulation and cladding, and runs the 180 mm flue with a cowl and roof flashing that stand up to the south-easter and winter rain.

Merida IT100K FAQs

Is the Hydrofire Merida a closed combustion fireplace?

Yes. The fire burns behind a glass door, so you control the air and get far more heat from each log than an open hearth gives you.

Can I put a TV above the Merida?

It is possible with the right cladding, insulation and clearances. We plan the wall so the area above the fire stays at a safe temperature for electronics.

Weighing up a Hydrofire fireplace against other brands? Read our Hydrofire buyer’s guide, then book a chat with our team about your wall.

Additional information

Weight

130 kg

Dimensions

104 x 47 x 65 cm

Material

Fuel Type

Wood

Power Output kW

Heating Area

Efficiency %

73.00%

Flue Outlet

Top

Flue Diameter

180 mm