← Back to all articles Braai

Braai Inserts: Choosing and Fitting One Into Brick or a Counter

19 November 2026 · 9 min read · fireflames
Braais project photo

A braai insert is only half the job. The other half is cutting the brick or counter, sorting the chimney and, for gas, getting a CoC. Here is how to choose one and have it fitted properly.

Quick answer

A braai insert is a ready made firebox that slides into a brick surround, an alcove or a counter. Choose one by measuring the opening first, then pick the steel grade, the fuel (wood, charcoal or gas) and the grid. The fitting matters as much as the unit: the opening must be the right size, the surround must handle the heat, and the chimney must draw. A gas braai insert also needs a registered gas installer to sign off with a CoC.

Most people start by shopping for the box. They compare sizes, doors and finishes online, find one they like, and only then ask how it will go into the wall. That is where the trouble starts. The opening is a little too small, the counter top is not rated for heat, or there is no way to get a flue out through the roof.

Our team fits braai inserts into old brick alcoves, new plastered surrounds and outdoor kitchen counters around Cape Town. This guide covers what to look for in the unit and, more importantly, what the fitting involves, so you know what to plan for before you buy.

Already have a space in mind? Send us a photo and the opening size, and we will tell you what will fit and quote the installation.

Get a braai insert fitting quote

What a Braai Insert Is and Where It Fits

A braai insert is the steel heart of a built in braai. It holds the fire, the grid and usually a door, and it is designed to be built around rather than to stand on its own. The surround, the wood store and the chimney are built separately to suit your home.

There are three common places to put one:

Existing brick alcove

The old braai is removed and a new insert is fitted into the cavity. The opening often needs trimming or packing out so the new unit sits square.

New brick or plastered surround

We build the surround around the insert, with a wood nook below and a chimney above. This gives you the most freedom on size and finish.

Outdoor kitchen counter

The insert drops into a counter run next to prep space and storage. The counter must be built from materials that can take the heat.

Black steel braai insert being fitted into a brick alcove during installation
Work in progress: a new braai insert going into an existing alcove after the old unit came out.

Braai Insert Ideas: Choosing the Right Unit

Once you know where it will go, you can narrow down the unit. These are the choices that make the biggest difference day to day.

Size the braai insert to the opening, not the other way round

Measure the width, height and depth of the space, then check the outside dimensions of the unit, not just the cooking area. Allow for the gap around the box that stops heat going straight into the brick. Our guide to built in braai dimensions shows the common sizes and how much room a family braai really needs.

Steel grade and finish

Near the sea, salty air eats through mild steel quickly. A good stainless steel unit costs more up front but lasts far longer on a coastal patio. If you are weighing up the options, read our stainless steel built in braai buyers guide before you choose.

Wood, charcoal or gas

Wood and charcoal inserts are the most common and need a proper chimney. A gas braai insert lights quickly and is easy to control, but it needs a gas supply line and a compliance certificate. Some homes go for a combination unit with a gas side and a wood side.

Doors, grids and extras

A fold down door keeps rain and wind out and tidies the look when the braai is not in use. Check whether the unit has a fire grate, a coal tray that slides out for cleaning, and adjustable grid heights.

Fitting a Braai Insert Into Brick

Brick is the most forgiving place to fit a braai insert, but it still needs care. This is how our team usually approaches it.

1

Check the space and the chimney

We measure the opening and look at the chimney above it. A new insert often has a different throat size from the old one, and the flue has to match.

2

Prepare the opening

Old units come out, loose brick is made good and the opening is trimmed or packed so the new insert sits level and square.

3

Set the insert and leave a heat gap

The unit is set on a solid base with the right clearance around it, so the steel can expand without cracking the brick.

4

Connect to the chimney

The insert is sealed to the flue so smoke goes up, not out of the gaps between the box and the brick.

5

Plaster, seal and finish

The edges are plastered or trimmed to frame the unit neatly, and the surround is left to cure before the first fire.

New black braai insert fitted in a brick alcove with the edges still waiting for plaster
The braai insert is set and level, with the gaps left ready for plastering around the frame.

Not sure whether your alcove or chimney will suit a new braai insert? Our team will come out, measure and give you a written quote.

Book a braai insert site visit

Fitting a Braai Insert Into a Counter

A counter install looks great in an outdoor kitchen, but it is where most DIY fits go wrong. A counter top that sits right against hot steel can crack, discolour or lift. The unit needs a heat resistant base, the right gap on every side, and a top that is rated for the temperatures near a fire.

Plan the counter around how you cook. Leave landing space on both sides of the braai, keep the wood or gas bottle storage under the counter, and think about where the smoke will go. If you are planning a full counter run, our built in braai Cape Town team can build the surround and the counter as one job.

Counter fitting checklist

  • ✓Heat resistant base under the insert
  • ✓Clearance between the steel and the counter top
  • ✓A chimney or canopy above, unless it is a gas unit rated for open use
  • ✓Room to open the door and clean out the ash tray
  • ✓Ventilation for any gas bottle stored below

Gas Braai Insert Installation and the CoC

A gas braai insert must be connected by a registered gas installer, who tests the line and issues a certificate of compliance. Without it you may have trouble with insurance or when you sell the house. The bottle position, the regulator, the pipe route and the ventilation all form part of the sign off.

We arrange the gas side as part of the installation, so you deal with one team from start to finish. You can read more on our gas installation and CoC page.

⚠ Safety first

Never connect a gas braai insert yourself or use a bottle that sits inside a closed cupboard with no ventilation. A small leak in a closed space is dangerous.

Choosing a Braai Grid for Built In Braai Inserts

The grid is the part you touch every time you braai, so it is worth getting right. Most inserts come with one, but you can often upgrade it. Look for a stainless steel grid that fits the opening snugly, sits on adjustable runners and lifts out for cleaning. A grid that is too short leaves gaps where food falls through, and a thin grid bends after a season of hot fires.

If your current braai is still sound but tired, a new grid, door or fire grate might be all it needs. Our article on how to upgrade your existing braai covers the smaller jobs that make a big difference.

Open stainless steel braai insert showing the grid and fold down door with firewood stacked beneath
A stainless braai insert with a full width grid and a fold down door that closes when the braai is not in use.

Why Cape Town Homeowners Choose Fire Flames

Buying a braai insert is easy. Getting it to fit, draw and last is the part that needs a builder. Our team handles the whole job: measuring the space, removing the old unit, building or trimming the surround, matching the chimney and arranging the gas sign off where needed. We work across Cape Town, from Atlantic seaboard patios to Northern Suburbs entertainment areas, and we quote after a site visit so the price covers what your space actually needs.

Send us a photo of your space and tell us which braai insert you like. We will come out, measure and send a written quote.

Get my free braai quote

Braai Insert: Common Questions

What size braai insert do I need?

Measure the opening first and leave room for a heat gap around the unit. For most families a medium sized insert is enough, while people who cook for big groups often go wider. Check the outside size of the unit, not just the grid.

Can you put a braai insert into an existing brick braai?

Yes. The old unit is removed, the opening is made good and the new braai insert is set and sealed to the chimney. Sometimes the chimney throat needs changing to suit the new box.

Is a stainless steel braai insert worth it?

Near the coast, yes. Stainless steel resists rust far better than mild steel, so it lasts longer and looks better for years. Inland, a good treated steel unit can also work well.

Does a gas braai insert need a certificate of compliance?

Yes. A registered gas installer must connect and test the gas line and issue a CoC. It protects you, your insurance and any future sale of the house.

How much does it cost to fit a braai insert?

It depends on the unit, the brick or counter work, the chimney and any gas connection. We quote after a site visit so every part of the job is included in writing.

Planning this kind of work?

Call or WhatsApp with your suburb and photographs. Fire Flames can discuss your fireplace, braai or home project and quote.

Get A Quote →